ESAB PowerCut 1600 Instruction Manual download pdf (Page 19)

- 19 -

bp16ea

Code SolutionCauseProblem

15 Bus charging fault Under voltage on the primary

bus.

Check the bus charger.

19 Torch trigger early

engagement

Torch trigger depressed at

power up.

Check the trigger.

20 No return at PIP (Parts In

Place) check of consum

ables.

The piston was not

withdrawn when air was

released.

Check/clean consumables.

Check the compressed air

supply.

21 No unbroken current path at

PIP (Parts In Place) check of

consumables.

The piston did not fall back

when the air supply was

removed.

Check/clean consumables.

8 ORDERING SPARE PARTS

Repair and electrical work should be performed by an authorized ESAB serviceman.

Use only ESAB original spare and wear parts.

Powercut 1600 is designed and tested in accordance with the international and Euro

pean standards 60974-1 and 60974-10. It is the obligation of the service unit which

has carried out the service or repair work to make sure that the product still conforms

to the said standard.

Always provide the serial number of the unit on which the parts will be used. The

serialnumber is stamped on the units measuring plate.

Spare parts may be ordered through your nearest ESAB dealer, see the last page of

this publication.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

No comments

ESAB PowerCut 1600 Instruction Manual Page 19