ESAB POWERCUT-1500 Instruction Manual download pdf (Page 2)

These INSTRUCTIONS are for experienced operators. If you are not fully familiar with the principles

of operation and safe practices for arc welding and cutting equipment, we urge you to read our booklet,

"Precautions and Safe Practices for Arc Welding, Cutting, and Gouging," Form 52-529. Do NOT permit

untrained persons to install, operate, or maintain this equipment. Do NOT attempt to install or operate

this equipment until you have read and fully understand these instructions. If you do not fully

understand these instructions, contact your supplier for further information. Be sure to read the Safety

Precautions before installing or operating this equipment.

BE SURE THIS INFORMATION REACHES THE OPERATOR.

YOU CAN GET EXTRA COPIES THROUGH YOUR SUPPLIER.

USER RESPONSIBILITY

This equipment will perform in conformity with the description thereof contained in this manual and accompanying

labels and/or inserts when installed, operated, maintained and repaired in accordance with the instructions provided.

This equipment must be checked periodically. Malfunctioning or poorly maintained equipment should not be used.

Parts that are broken, missing, worn, distorted or contaminated should be replaced immediately. Should such repair

or replacement become necessary, the manufacturer recommends that a telephone or written request for service

advice be made to the Authorized Distributor from whom it was purchased.

This equipment or any of its parts should not be altered without the prior written approval of the manufacturer. The

user of this equipment shall have the sole responsibility for any malfunction which results from improper use, faulty

maintenance, damage, improper repair or alteration by anyone other than the manufacturer or a service facility

designated by the manufacturer.

1 2 3 4 5 6 7 ... 41 42

No comments

ESAB POWERCUT-1500 Instruction Manual Page 2