ESAB Powercut 650 Specifications download pdf (Page 2)

This equipment will perform in conformity with the description thereof contained in this manual and

accompanying labels and/or inserts when installed, operated, maintained and repaired in accordance

with the instructions provided. This equipment must be checked periodically. Malfunctioning or

poorly maintained equipment should not be used. Parts that are broken, missing, worn, distorted or

contaminated should be replaced immediately. Should such repair or replacement become neces-

sary, the manufacturer recommends that a telephone or written request for service advice be made

to the Authorized Distributor from whom it was purchased.

This equipment or any of its parts should not be altered without the prior written approval of the

manufacturer. The user of this equipment shall have the sole responsibility for any malfunction

which results from improper use, faulty maintenance, damage, improper repair or alteration by any-

one other than the manufacturer or a service facility designated by the manufacturer.

BE SURE THIS INFORMATION REACHES THE OPERATOR.

YOU CAN GET EXTRA COPIES THROUGH YOUR SUPPLIER.

These INSTRUCTIONS are for experienced operators. If you are not fully familiar with the

principles of operation and safe practices for arc welding and cutting equipment, we urge

you to read our booklet, “Precautions and Safe Practices for Arc Welding, Cutting, and

Gouging,” Form 52-529. Do NOT permit untrained persons to install, operate, or maintain

this equipment. Do NOT attempt to install or operate this equipment until you have read

and fully understand these instructions. If you do not fully understand these instructions,

contact your supplier for further information. Be sure to read the Safety Precautions be-

fore installing or operating this equipment.

CAUTION

USER RESPONSIBILITY

1 2 3 4 5 6 7 ... 111 112

No comments

ESAB Powercut 650 Specifications Page 2